What is the Rejectoinal Connector?

What is the Rejectoinal Connector? What is the structure of it?

A Jane cow usually consists of a square plastic socket with multiple square needles arranged neatly. The difference between the bull connector and the horn connector is that the bull connector has the clamps on both sides removed.

The outer dimensions of the connector usually include 1.27 pitch, 2.0 pitch, and 2.54 pitch as required; Depending on the spacing, the diameter of the square row of needles used will change accordingly. The contact surface between the bottom and the PCB board can be designed to be SMT patch type or DIP inserted directly into 180 degrees. A Jane cow usually consists of a square plastic socket with multiple square needles arranged neatly. The difference between the bull connector and the horn connector is that the bull connector has the clamps on both sides removed.

The outer dimensions of the connector usually include 1.27 pitch, 2.0 pitch, and 2.54 pitch as required; Depending on the spacing, the diameter of the square row of needles used will change accordingly. The contact surface between the bottom and the PCB board can be designed as SMT patch type or DIP straight plug 180 degrees.

Function: After welding on PCB board, connect the corresponding specifications of IDC flat cable, and then form the circuit connection mode required by the designer with other circuits. It is usually used to transmit control signals and weak currents. Simple cow connector is a kind of universal connection device widely used in electronics, electrical appliances and instruments, mainly plays the role of current or signal transmission. It is often used with row pins to form board-to-board connections. It has four basic structural components:

1. Contact person. It is the core part of the bus connector that performs the electrical connection function. Typically, a pair of contacts consists of positive and negative contacts, and electrical connections are made by inserting negative and positive contacts.

2. Housing. Also known as the shell, it is the cover for the Jane Ox connector. It provides mechanical protection for the built-in insulation mounting plate and pins, and alignment when plugs and receptacles are inserted to secure the Jane Ox connector to the device.

3. Insulator. Insulator is also commonly referred to as the base or plug-in of a simple cow connector. Its function is to arrange the contacts according to the desired position and spacing, and to ensure insulation between the contacts and between the contacts and the housing. Good insulation resistance, voltage resistance and easy processing are the basic requirements for selecting insulating materials processed into insulators.

4. Attachment. Accessories are divided into structural accessories and installation accessories. Structural accessories, such as clasp, positioning key, positioning pin, guide pin, connecting ring, cable clamp, sealing ring, washer, etc. Install accessories such as screws, nuts, screws, spring rings, etc. Most accessories are standard and universal.

The stamping terminal of the simple cow connector can avoid the capillary cracks in the bending process and ensure the complete electromechanical connection. The coplanar tolerance of the pin is controlled to ±0.05mm. Surface mounted pin coplanar detection ensures the reliability of the circuit board assembly process, ensures good welding, improves the product yield, and reduces the cost. It also improves the firmness of the right-angle FPC connector to prevent damage to the line pins and line bus due to improper operation. "Unbreakable" is the right word to describe it.